LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L Engine (Service Information) >> Engine Block >> Flex Plate/Flywheel >> Removal >> Flywheel/FLEXPLATE

Flex Plate/Flywheel: Removal: Flywheel/FLEXPLATE

  1. Remove the transmission. For manual, refer to REMOVAL . For automatic, refer to REMOVAL .
  2. Remove the starter. Refer to REMOVAL .
    Fig 1: Identifying Special Flywheel Holding Tool
    GC0033947Courtesy of CHRYSLER LLC
  3. Using Special Tool 9102 Flywheel Locking Tool (1), lock the flywheel by inserting the tool in the starter opening.
  4. Remove the clutch if equipped. Refer to REMOVAL .
    Fig 2: Removing/Installing Flywheel/Flexplate
    GC0034467Courtesy of CHRYSLER LLC
  5. Remove and discard the flywheel bolts (1).
  6. Remove the spacer (2) and the flywheel/flexplate (3).
  7. Inspect the rear crankshaft oil seal for leakage. Replace if required.
scientia non olet · About LEMON Manuals