LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Crankshaft Position Sensor >> Installation >> Crankshaft Position Sensor

Crankshaft Position Sensor

Fig 1: Removing/Installing Crankshaft Position Sensor
GC0032338Courtesy of CHRYSLER LLC
  1. Install the crankshaft position sensor (1) to the engine. Tighten to 8 N.m (71 in. lbs.).
  2. Connect the crankshaft position sensor harness connector.
  3. Install the air cleaner housing. Refer to INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals