LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Fuel System) >> Fuel Delivery - 3.5L Gas >> Fuel Pump Module >> Removal >> Fuel Tank

Fuel Tank

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release Fuel System pressure. See FUEL SYSTEM PRESSURE RELEASE PROCEDURE - 3.5L GAS .
  2. Drain Fuel Tank.
    Fig 1: Fuel Fill Door
    GC0066319Courtesy of CHRYSLER LLC
  3. Remove the 2 Fuel Filler Door Fasteners (1), and remove the Gas Cap (2) and Fuel Filler Door (3).
  4. Remove the 4 Fuel Filler Tube Panel Fasteners (4) and remove the Fuel Filler Tube Panel (2).
    Fig 2: Fuel Fill Tube Fastener & Gas Cap
    GC0066320Courtesy of CHRYSLER LLC
  5. Remove the Fuel Filler Tube Fastener (1).
    Fig 3: Fuel Fill Tube
    GC0066321Courtesy of CHRYSLER LLC
  6. Remove the tie straps (2).
  7. Disconnect the harness connector (1).
  8. Remove the Fuel Filler Tube Grommet (3).
    Fig 4: Fuel Lines
    GC0066324Courtesy of CHRYSLER LLC
  9. Disconnect the harness connector (1).
  10. Disconnect the Fuel Feed line (2) and Fuel Return line (3).
    Fig 5: Fuel Tank
    GC0066322Courtesy of CHRYSLER LLC
  11. Remove the center fuel tank strap (1).
  12. Support the fuel tank with a transmission jack.
    Fig 6: Fuel Tank EVAP Line
    GC0066323Courtesy of CHRYSLER LLC
  13. Disconnect the Evaporative Emission Vent Line (1) from the Fuel Tank (2).
  14. Lower the Fuel Tank.
    Fig 7: Fuel Pump Harness Connector & Fuel Lines
    GC0066347Courtesy of CHRYSLER LLC
  15. Disconnect the Fuel Pump Harness Connector (1).
  16. Disconnect the Fuel Feed Line (3) and the Fuel Return Line (2) from the Fuel Pump (6).
  17. Unscrew Fuel Pump Lock Ring (5).
  18. Remove the Fuel Pump Assembly (6).
scientia non olet · About LEMON Manuals