LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.5L Engine (Service Information)) >> Engine Block >> Retainer Oil Seal-Crank-Rear >> Removal

Retainer Oil Seal-Crank-Rear: Removal

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission.
  2. Remove the flex plate. See REMOVAL .
  3. Remove the 7 upper bolts (1) holding the rear main seal carrier (3) to the engine block.
  4. Remove 2 lower bolts (2) holding the rear main seal carrier (1) to the engine block
  5. Remove the rear main seal carrier (1) from the engine block and oil pan.
  6. Clean sealant residue from the engine block and oil pan.
NOTE: Seal retainer gasket is bonded to the retainer and must be replaced as an assembly.
scientia non olet · About LEMON Manuals