LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.5L Engine (Service Information)) >> Engine Block >> Damper-Vibration >> Removal >> Vibration Damper

Vibration Damper

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remote Ground
GC0066161Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
    Fig 2: Crankshaft Locking Tool
    GC0066245Courtesy of CHRYSLER LLC
  2. Install the crankshaft locking tool.
    Fig 3: Accessory Drive Belt Bolt
    GC0066190Courtesy of CHRYSLER LLC
  3. Remove accessory drive belt. Refer to REMOVAL .
    Fig 4: Oil Filter/Cooler Housing, Idler Pulley, Vibration Damper Bolt And Crankshaft Damper
    GC0066246Courtesy of CHRYSLER LLC
  4. Raise vehicle on hoist.
  5. Remove vibration damper bolt (4).
  6. Remove crankshaft damper (3).
scientia non olet · About LEMON Manuals