LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wiper System & Washer System (Service Information)) >> Wipers/Washers >> Washer Nozzle >> Removal >> Front Washer Nozzle

Front Washer Nozzle

WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: To avoid serious or fatal injury during and following any front wiper system service, be certain that the key is removed from the ignition lock. When the multi-function switch is set to the I (INTERMITTENT or AUTOMATIC) position, the front wipers could move unexpectedly at any time causing injury or damage.
CAUTION: Do not open the hood while the front wiper arms are folded away from the windshield. Both the hood and the wiper arms could become damaged.
Fig 1: Front Washer Nozzle And Front Wiper Arm
GC0065854Courtesy of CHRYSLER LLC
  1. Using hand pressure, unsnap the front washer nozzle (1) from the front wiper arm (2).
  2. Disconnect the washer hose (2) from the barbed nipple of the front washer nozzle.
  3. Remove the front washer nozzle from the vehicle.
scientia non olet · About LEMON Manuals