LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wiper System & Washer System (Service Information)) >> Wipers/Washers >> Check Valve >> Removal >> Front Washer System Check Valve

Front Washer System Check Valve

WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Check Valve Remove/Install
GC0037631Courtesy of CHRYSLER LLC
  1. Unlatch and open the hood panel.
  2. Disconnect the washer hoses (3 and 4) from the three barbed nipples of the front check valve unit (2) near the dash panel (1).
  3. Remove the check valve from the vehicle.
scientia non olet · About LEMON Manuals