Event 7266-Cruise Control (Esp Control Unit) Not Available: Testing

WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

ABM/ESP INTERNAL FAILURE DTC PRESENT
1. Turn the ignition on.
2. With the scan tool, read DTCs.
3. With the scan tool, erase DTCs.
4. Turn the ignition off.
5. Turn the ignition on.
6. With the scan tool, read DTCs.
  Does the scan tool display EVENT 7266-CRUISE CONTROL (ESP CONTROL UNIT) NOT AVAILABLE IS ACTIVATED?
  
  Yes
  - Replace the Anti-Lock Brake Module in accordance with the Service Information.
  - Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .
  No
  - Perform the ABS Intermittent Condition diagnostic procedure.
  - Refer to the ABS-INTERMITTENT CONDITION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure