Code Description
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
Ignition on, engine running.
- Set Condition:
When the ECM recognizes an internal failure has occurred. One trip fault.
| Possible Causes |
|---|
| ECM |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to DTC-Based Diagnostics/MODULE, Engine Control (ECM) - Standard Procedure .