Code Description
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
The messages sent on the CAN bus are distinguished by an identifier (ID). Each CAN ID is defined to contain a certain number of bytes. The Anti-Lock Brake Module (ABM) verifies that it has received the proper number of bytes for each ID.
- When Monitored:
Continuously with the ignition on, one valid CAN ID received at least once.
- Set Condition:
When the ABM detects an incorrect CAN ID from the ECM.
| Possible Causes |
|---|
| BCM CAN BUS DTCS PRESENT |
| ECM DTCS PRESENT |
| ANTI-LOCK BRAKE MODULE |