4BDA-Dynamics Sensor Implausible Signal: Testing
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK IF DYNAMICS SENSOR DTCS ARE PRESENT
- With the scan tool, read Dynamics Sensor DTCs.
Are there any Dynamics Sensor DTCs present?
Yes
- Go To 2
No
- Perform the ABS Intermittent Condition diagnostic procedure.
- Refer to the ABS-INTERMITTENT CONDITION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure
- With the scan tool, read Dynamics Sensor DTCs.
- DYNAMICS SENSOR
- Replace the Dynamics Sensor in accordance with the Service Information.
- Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .
- Road test the vehicle.
- With the scan tool, read ABS diagnostics.
Did DTC 4BDA-DYNAMICS SENSOR IMPLAUSIBLE SIGNAL reset?
Yes
- Replace the Anti-Lock Brakes Module in accordance with the Service Information.
- Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .
No
- Test complete.