Diagnostic Test
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- TEST FOR INTERMITTENT CONDITION
- Using the scan tool, record and erase the DTCs
- Operate the Passenger Window Switch in all positions several times.
- Cycle the ignition from on to off.
- Turn the ignition on.
- Using the scan tool, read the DTCs.
Does the scan tool display 909C-PASSENGER WINDOW CONTROL CIRCUIT STUCK ON?
Yes
- Replace the Body Control Module in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure .
No
- The conditions that caused this code to set are not present at this time. Using the SYSTEM WIRING DIAGRAMS as a guide, inspect the wiring and connectors.
- Perform the BODY VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure .