LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 ((Transmission Control Module (TCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0717-Input Speed Sensor 1 Circuit No Signal >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
SENSOR SUPPLY VOLTAGE CIRCUIT OPEN
INPUT SPEED SENSOR 1 (N2) SIGNAL CIRCUIT OPEN
SPEED SENSOR 1 (N2) SIGNAL CIRCUIT SHORT TO ANOTHER CIRCUIT
SENSOR GROUND CIRCUIT OPEN
SENSOR GROUND CIRCUIT SHORT TO ANOTHER CIRCUIT
SPEED SENSOR 1 (N2) SIGNAL CIRCUIT SHORT TO GROUND
SENSOR GROUND CIRCUIT SHORT TO GROUND
SPEED SENSOR 1 (N2)
TRANSMISSION CONTROL MODULE

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure