DTC 90D4: Lost Communication With Cluster/CCN: Notes
WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams refer to SYSTEM WIRING DIAGRAMS article.
- When Monitored:
With the ignition on.
Battery voltage between 10 and 16 volts.
IOD fuse installed.
EIS (CGW) is configured correctly.
- Set Condition:
Bus messages not received from the Cluster/CCN for approximately 2 to 5 seconds.
| Possible Causes |
|---|
| CAN C BUS CIRCUITS OPEN OR SHORTED |
| DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES |
| EIS (CGW) NOT CONFIGURED CORRECTLY |
| CLUSTER/CCN POWER AND GROUND |
| CLUSTER/CCN |
| MODULE THAT SET THE DTC |