LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Interior & Exterior - Electrical Diagnostics >> Convertible Top >> DTC Troubleshooting >> Power Top Control Module Verification Test >> Power Top Verification Test

Power Top Verification Test

Disconnect all jumper wires and reconnect all previously disconnected components and connectors.

Operate the Power Top Switch to lower the Power Top completely.

Operate the Power Top Switch to raise the Power Top completely.

With the scan tool, confirm that no DTCs are present and that all components are functioning properly.

If a DTC is present, refer to the appropriate category and select the corresponding DTC.

Are any DTCs present? 

YES 

  1. Repair is not complete, refer to appropriate DTC.

NO 

  1. Repair is complete.
scientia non olet · About LEMON Manuals