LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Interior & Exterior - Electrical Diagnostics >> Convertible Top >> DTC Troubleshooting >> DTC 9003, 9004: Power Top Control Module EEPROM Error >> Diagnostic Test

Diagnostic Test

  1. 1) Power Top Control Module (PTCM) 
    NOTE: This DTC indicates an internal PTCM fault.

    With the scan tool, read and record the PTCM DTCs and then erase the PTCM DTCs

    Perform 3 ignition key cycles, leaving the ignition key on for a minimum of 30 seconds per cycle.

    With the scan tool, read the PTCM DTCs.

    Did this DTC set again? 

    Yes 

    1. Replace the Power Top Control Module. Refer to REMOVAL .
    2. Perform POWER TOP VERIFICATION TEST .

    No 

    1. The condition that caused this DTC to set is currently not present.
    2. Perform POWER TOP VERIFICATION TEST .
scientia non olet · About LEMON Manuals