LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Aspen 5.7 2, RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Control Arm - Upper >> Installation >> Upper Control Arm

Upper Control Arm

Fig 1: Control Arm Pivot Bolts
GC0011134Courtesy of CHRYSLER LLC
  1. Position the control arm (3) into the frame brackets (1&2). Install bolts and tighten to 102 N.m (75 ft. lbs.).
  2. Insert ball joint in steering knuckle and tighten ball joint nut to 75 N.m (55 ft. lbs.).
  3. Install the wheel and tire assembly. Refer to STANDARD PROCEDURE .
  4. Remove the support and lower vehicle.
  5. Perform a wheel alignment. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals