LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 SRT-8 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery System >> Battery Hold Down >> Installation

Battery Hold Down: Installation

Fig 1: Battery Hold Down Clamp
GC0015602Courtesy of CHRYSLER LLC
  1. Install the battery hold down clamp and bolt. Tighten the bolt to 4 N.m (35 in. lbs.).
  2. Connect the battery negative cable.
  3. Install the rear compartment floor trim panel.
scientia non olet · About LEMON Manuals