Cable-Park Lock: Removal

Fig 1: Ignition Key/Switch Positions

Courtesy of CHRYSLER LLC

1 - LOCK

2 - ACC

3 - ON

4 - START

Place ignition key in the ACC (2) position. See Fig 1

Fig 2: Park Lock Cable at Ignition Cylinder

Courtesy of CHRYSLER LLC

1 - RETAINER

2 - CONNECTOR

3 - IGNITION CYLINDER

4 - PARK LOCK CABLE

Remove the lower instrument panel trim as necessary to access the park lock cable.

Disconnect park lock cable (4) from ignition cylinder (3). See Fig 2.

Fig 3: Park Lock Cable at Shifter

Courtesy of CHRYSLER LLC

1 - PARK LOCK CABLE

2 - SHIFTER ASSEMBLY

3 - SHIFT MECHANISM CAM

Remove the floor console as necessary for access to the park lock cable. Refer to REMOVAL .
If necessary, remove the bolts holding the shield, covering the gearshift and park lock cables, to the floorpan and remove the shield.
Disconnect the park lock cable from the shift mechanism. See Fig 3. Release retention tab using suitable screwdriver.