Pump - Water: Installation: 3.5L

Fig 1: Water Pump - 3.5L

GC0014719

Courtesy of CHRYSLER LLC

1 - O-RING

2 - IMPELLER

3 - WATER PUMP BODY

Clean all O-ring surfaces on front cover.
Position water pump (3) and O-ring to engine.
Install mounting bolts. Tighten to 12 N.m (105 in. lbs.).
Install timing belt. Refer to INSTALLATION .
Install accessory drive belts. See INSTALLATION .
Fill cooling system. See STANDARD PROCEDURE .