Column Service Information: Wheel-Steering: Removal

WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to electrical restraint system for service procedures. Failure to do so may result in accidental deployment of the airbag and possible personal injury.

CAUTION: All fasteners must be torqued to specification to ensure proper operation of the steering column.

Fig 1: Removing/Installing Driver Airbag

Courtesy of CHRYSLER LLC

1. Position the front wheels straight-ahead  .
2. Fully extend or pull out adjustable steering column.
3. Disconnect the negative (ground) cable from the battery.
4. Remove the airbag (3). Refer to REMOVAL .
   Fig 2: Removing/Installing Steering Wheel

   Courtesy of CHRYSLER LLC
5. Remove the steering wheel retainer bolt (2), then slide the steering wheel (1) off the shaft.
6. If wheel is being replaced, transfer attached components as necessary.