LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Vehicle Theft Security System (Service Information)) >> Intrusion Module >> Installation

Intrusion Module: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/ Installing Intrusion Module
GC0041438Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the intrusion module (1) onto the instrument panel.
  2. Install the two screws (2) that secure the module (1) to the instrument panel.
  3. Connect the electrical connector (3) on the module (1).
  4. Install the instrument panel top cover (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals