LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection (Except Diesel) >> Throttle Control Cable >> Installation

Throttle Control Cable: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. From the engine compartment, push the housing end fitting and grommet into the dash panel. Install grommet into the dash panel.
  2. Install the cable housing (throttle body end) into the cable mounting bracket on the engine.
  3. From inside the vehicle, hold up the pedal and install throttle cable and cable retainer in the upper end of the pedal shaft.
  4. At the dash panel, install the cable retainer clip between the end of the throttle cable fitting and grommet
  5. From the engine compartment, rotate the throttle lever wide open and install the throttle cable.
scientia non olet · About LEMON Manuals