LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection (Except Diesel) >> O2 Sensor >> Removal >> 1/1 Upstream - 2.0/2.4L

1/1 Upstream - 2.0/2.4L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Oxygen Sensor (1/1 Upstream & 1/2 Downstream)
GC0021612Courtesy of DAIMLERCHRYSLER CORP.
1 - DOWN STREAM O2 SENSOR
2 - UP STREAM O2 SENSOR
  1. Remove the air cleaner lid and makeup air hose.
  2. Remove the negative battery cable.
  3. Disconnect electrical connector from sensor.
  4. Remove sensor using an oxygen sensor special tool C-4907.
scientia non olet · About LEMON Manuals