LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection (Except Diesel) >> O2 Sensor >> Removal >> 1/1 Upstream - 1.6L

1/1 Upstream - 1.6L

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upstream O2 Sensor 1/1
GC0021661Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the air cleaner cover.
  2. Remove the negative battery cable.
  3. Disconnect electrical connector from O2 sensor.
  4. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent.
scientia non olet · About LEMON Manuals