LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Battery System) >> Battery Tray Support Bracket >> Installation

Battery Tray Support Bracket: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery tray support bracket and install the two battery tray support bracket retaining bolts.
  2. Raise the vehicle on the hoist, (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE) .
  3. Working under the vehicle, install the remaining two battery tray support bracket retaining bolts.
  4. Lower the vehicle.
  5. Install the battery tray, (Refer to ELECTRICAL/BATTERY SYSTEM/TRAY - INSTALLATION - GASOLINE ENGINE) .
  6. Install the battery, (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION - GASOLINE ENGINE) .
  7. Install the air cleaner housing, (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) .
  8. Connect the battery negative cable.
scientia non olet · About LEMON Manuals