Sensor-Boost Pressure: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - AIR FLOW CONTROL VALVE |
| 2 - BOOST PRESSURE SENSOR |
| 3 - CHARGE AIR CROSS OVER TUBE |
| 4 - EGR TUBE |
- Disconnect the negative battery cable.
- Disconnect the boost pressure sensor (2) electrical connector.
- Remove the sensor (2) fasteners from the charge air cross over tube (3), and remove sensor (2).