LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L Engine (Service Information) >> Engine Block >> Collar - Structural >> Removal

Collar - Structural: Removal

Fig 1: Locating Battery
GC0015222Courtesy of CHRYSLER LLC
  1. Disconnect negative battery (1) cable located in trunk.
    Fig 2: Lower Splash Shield
    GC0015233Courtesy of CHRYSLER LLC
  2. Raise vehicle on hoist.
  3. Remove lower splash shield retaining bolts (1) and splash shield (2).
    Fig 3: Removing Trans Mount
    GC0015330Courtesy of CHRYSLER LLC
  4. Remove transmission mount bolts (2).
  5. Place a transmission jack under the transmission pan and raise engine and transmission.
    Fig 4: Locating Structural Collar Bolts
    GC0015227Courtesy of CHRYSLER LLC
  6. Remove bolts attaching structural collar to oil pan (3) and transmission bell housing (4).
    Fig 5: Removing Structural Collar
    GC0015345Courtesy of CHRYSLER LLC
  7. Move structural collar (1) to the right.
  8. Remove structural collar (1) out towards the rear.
scientia non olet · About LEMON Manuals