LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module - Powertrain Control >> Standard Procedure >> Pcm/ECM Programming - Gas >> Step-By-Step Instructions

Step-By-Step Instructions

Check PCM Odometer 

From the "Home" screen, select "ECU View".

  1. Select "PCM"
  2. Select "Misc. Functions"
  3. Select "Check PCM Odometer" and follow the on screen instructions.
  4. When complete, select "Finish".

Check PCM VIN  

From the "Home" screen, select "ECU View"

  1. Select "PCM"
  2. Select "Misc. Functions"
  3. Select "Check PCM VIN" and follow the on screen instructions.
  4. When complete, select "Finish"

Initialize CVT 

From the "Home" screen, select "ECU View"

  1. Select "TCM"
  2. Select "Misc. Functions"
  3. Select "Initialize CVT" and follow the on screen instructions.
  4. When complete, select "Finish"

Initialize EGS 

From the "Home" screen, select "ECU View"

  1. Select "TCM"
  2. Select "Misc. Functions"
  3. Select "Initialize EGS" and follow the on screen instructions.
  4. When complete, select "Finish"

Learn ETC  

From the "Home" screen, select "ECU View"

  1. Select "PCM"
  2. Select "Misc. Functions"
  3. Select "Learn ETC" and follow the on screen instructions.
  4. When complete, select "Finish"

PCM Replaced  

The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:

  1. The original selling invoice
  2. DealerCONNECT Parts Key Codes
  3. Contacting the District Manager.

From the "Home" screen, select "ECU View"

  1. Select "WCM"
  2. Select "Misc. Functions"
  3. Select "PCM Replaced" and follow the on screen instructions.
  4. When complete, select "Finish"

Quicklearn 

From the "Home" screen, select "ECU View"

  1. Select "PCM"
  2. Select "Misc. Functions"
  3. Select "Quicklearn" and follow the on screen instructions.
  4. When complete, select "Finish"

Update CVT TCM 

From the "Home" screen:

  1. Select "ECU View"
  2. Select "TCM"
  3. Select "More Options"
  4. Select "ECU Flash"
  5. Select "Browse for New File" and follow the on screen instructions.
  6. Highlight the appropriate calibration.
  7. Select "Download to Scantool"
  8. Once the download is complete, select "Close" and then "Back"
  9. Highlight the listed calibration, select "Update Controller" and follow the on screen instructions.
  10. When the TCM update is complete, select "OK"
  11. Verify that the part number at the top of the "Flash TCM" screen has updated to the latest level.
scientia non olet · About LEMON Manuals