Diagnostic Test
- 1) ACTIVE DTC NOTE: For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
Turn the ignition on.
With a scan tool, select View DTCs.
Is the status Active for this DTC?
Yes
- Refer to ELECTRONIC CONTROL MODULES - ELECTRICAL DIAGNOSTICS for further possible causes.
No
- Refer to the *CHECKING FOR AN INTERMITTENT DTC Diagnostic Procedure. See *CHECKING FOR AN INTERMITTENT DTC .
- Perform *PCM VERIFICATION TEST .