Diagnostic Test
- 1) DTC IS ACTIVE
With a scan tool, select View DTCs.
Is the DTC active at this time?
Yes
- Using the Scan Tool and the Service Information, perform the ADAPTIVE CRUISE CONTROL ALIGNMENT Procedure.NOTE: Running the Alignment Procedure will remove the module from the In-Plant mode.
- Perform ACC MODULE VERIFICATION TEST . See STANDARD PROCEDURE .
No
- No repair is necessary. Ensure the lens is free of dirt, damage or other obstructions that would hinder the performance of the ACC imager lens. Clear the DTC and verify proper operation of the ACC system.
- Using the Scan Tool and the Service Information, perform the ADAPTIVE CRUISE CONTROL ALIGNMENT Procedure.