LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Town & Country Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Diagnostic Procedures - Introduction >> System Description And Functional Operation >> Overhead Console >> Ambient Temperature Sensor Fault Codes >> Ambient Temperature Sensor Test

Ambient Temperature Sensor Test

  1. Turn the ignition OFF.
  2. Disconnect the ATS harness connector.
  3. Measure the resistance of the ATS using the following min/max values:

The sensor resistance should read between these min/max values. If the resistance values are not OK, replace the Sensor.