LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Engine Block Heater >> Installation >> Installation - 2.0L/2.4L

Installation - 2.0L/2.4L

  1. Thoroughly clean core hole and heater seat.
  2. Insert heater assembly with element loop positioned upward  . See Figure.
  3. With heater seated, tighten center screw securely to assure a positive seal.
    CAUTION: To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or exhaust manifold.
  4. Connect power cord to heater.
  5. Lower vehicle.
  6. Fill cooling system ((Refer to COOLING - STANDARD PROCEDURE) ).
scientia non olet · About LEMON Manuals