LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Seat Belt Control Timer Module - Jr27 - Export >> Removal

Seat Belt Control Timer Module - Jr27 - Export: Removal

  1. Adjust the drivers seat to its full forward position.
  2. Disconnect and isolate the battery negative remote cable.
  3. Using a razor knife or equivalent, cut the carpet a small amount (about an inch or so) to access the Seat Belt Control Timer Module (SCTM).
  4. Disconnect the electrical connector.
  5. Remove the two screws retaining the SCTM.
  6. Remove the SCTM from the vehicle.
scientia non olet · About LEMON Manuals