LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Occupant Restraint Controller >> Removal

Occupant Restraint Controller: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  3. For a manual transmission, remove shifter knob and boot.
  4. For automatic transmission models, remove shifter knob and unsnap shift indicator bezel.
  5. Remove the four attaching screws to floor console.
  6. Remove parking brake lever. Refer to LEVER - PARKING BRAKE .
  7. Remove three mounting screws to ORC.
  8. Disconnect wire harness connectors and remove ORC.
scientia non olet · About LEMON Manuals