Brake Fluid Level Sensor: Removal

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Fluid Level Sensor

Courtesy of DAIMLERCHRYSLER CORP.

CAUTION: Do not spill brake fluid on any painted surfaces. Brake fluid can damage painted surfaces.

NOTE: The brake fluid level sensor cannot be replaced by itself. You must replace the fluid reservoir.

Disconnect the brake fluid level sensor harness connector.
Remove the screw attaching the fluid reservoir to the master cylinder.
Remove the fluid reservoir from the master cylinder.