Fuel Rail: Installation
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - WIRING HARNESS COVER |
| 2 - FUEL RAIL |
| 3 - FUEL LINE |
| 4 - FUEL INJECTOR |
| 5 - FUEL INJECTOR RETAINING CLIP |
| 6 - FUEL INJECTOR HARNESS CONNECTOR |
| 7 - FUEL RAIL SERVICE VALVE |
| 8 - FUEL RAIL BOLT |
- Install the fuel rail (2) with the fuel injectors (4) by moving the fuel rail (2) side to side and pushing gently inward towards the intake.
- Install the fuel rail bolts (8) attaching the fuel rail (2) to the intake. Tighten to 9 N.m (80 in. lbs.).
- Install the fuel injector harness (6) to the fuel injectors (4) then install the fuel injector harness connector retaining clips (5).
- Connect the fuel feed line (3) to the fuel rail. Tighten the fuel line to 38 N.m (28 ft. lbs.).
- Install the wiring harness cover (1), then install the wiring harness cover retaining screw.
- Install the engine cover. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION)(Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) .