LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Fuel System) >> Fuel Injection >> Throttle Body >> Removal >> Notes

Throttle Body: Removal: Notes

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Throttle Body
GC0032363Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover. Grasp both corners of the engine cover and pull up firmly.
  3. Remove the throttle body inlet tube.
  4. Disconnect the throttle body harness connector (3).
  5. Disconnect the PCV hose (1) from the throttle body.
  6. Remove the throttle body retaining bolts and PCV hose bracket.
  7. Remove the throttle body (5) and gasket from engine.
scientia non olet · About LEMON Manuals