Crankshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
- Install the crankshaft position sensor (1) to the engine. Tighten to 8 N.m (71 in. lbs.).
- Connect the crankshaft position sensor harness connector.
- Install the air cleaner housing. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - INSTALLATION) SRT.
- Connect the negative battery cable.