LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Fuel System) >> Fuel Injection >> Mass Air Flow Sensor >> Installation

Mass Air Flow Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the MAF sensor to air cleaner housing and install the retaining screws. See Figure.
  2. Connect the air intake hose to the MAF sensor and tighten clamp.
  3. connect the MAF wiring harness connector.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals