LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Fuel System) >> Fuel Injection >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the crankshaft position sensor into the access hole and install retaining bolt.
  2. Tighten the retaining bolt to 80 lbs. in. (9 N.m). See Figure.
  3. Connect crankshaft position sensor wiring harness connector. See Figure.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals