LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Fuel System) >> Fuel Injection >> Throttle Body >> Installation

Throttle Body: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mount throttle body and wiring clips. See Figure and Figure, tighten bolts to 12 N.m (105 in. lbs.).
  2. Connect electrical connector to throttle position sensor. See Figure.
  3. Install the throttle cable. See Figure.
  4. Install the air cleaner housing, refer to AIR CLEANER HOUSING .
  5. Connect the negative battery cable and install the battery cover.
scientia non olet · About LEMON Manuals