LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Fuel System) >> Fuel Injection >> O2 Sensor >> Removal >> 8.3L - Downstream 1/2, 2/2

8.3L - Downstream 1/2, 2/2

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle.
  2. Disconnect heated oxygen sensor electrical connector. See Figure.
  3. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent
scientia non olet · About LEMON Manuals