LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Fuel System) >> Fuel Injection >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the sensor into the hole.
  2. Install and tighten the mounting bolt to 11 N.m (95 in. lbs.) torque.
  3. Connect the electrical connector to the sensor and lock.
scientia non olet · About LEMON Manuals