LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Evaporative Emissions >> EVAP/Purge Solenoid >> Installation

EVAP/Purge Solenoid: Installation

  1. Install purge solenoid onto bracket. See Figure.
  2. Connect the vacuum hoses.
  3. Connect the electrical connector.
  4. Install the air cleaner box.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals