LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior & Exterior >> Instrument Panel >> Dash Panel >> Installation

Dash Panel: Installation

  1. Install right demist grille.
  2. Load panel onto beam assembly.
  3. Attach one screw to right attachment to beam assembly behind cluster (must be done first to correctly position panel on beam assembly).
  4. Attach two screws to left a/c duct and right upper center a/c duct.
  5. Attach two screws through passenger air bag opening to beam assembly.
  6. From right to left, attach the following 12 screws:
    • Two screws below passenger airbag opening.
    • Four screws in center stack area.
    • Four screws around steering column and one screw to left attachment to beam assembly behind cluster.
    • One screw to left lower corner to multi-function junction block bracket.
  7. Attach one screw attachment to right a/c duct.
  8. Attach four screw attachments along top cover rearward edge.
  9. Assemble defroster duct and attach two screws.
  10. Attach five instrument panel to plenum screws.
  11. Attach two instrument panel steering column to plenum screws.
  12. Assemble instrument panel cluster.
  13. If vehicle is equipped with front speakers, install four push nuts (P/N 06034833), connect speaker and attach to panel.
  14. If vehicle is equipped without front speakers, install two mastic patches (P/N 04595844AA) over speaker hole.
  15. Assemble passenger air bag.
  16. Assemble top cover.
  17. Install instrument panel lower right trim panel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - INSTALLATION) .
scientia non olet · About LEMON Manuals