Driver Seat Switch: Description

Vehicles equipped with power seats utilize a eight-way power seat switch. Hard-top models utilize an power seat switch with two knobs ganged together on the outboard seat cushion side shield. Convertible models utilize an power seat switch with three knobs ganged together. The switches are secured to the back of the seat cushion side shield with two screws. However, the control knobs for the hard-top eight-way power seat switch unit must be removed before the seat switch can be removed from the side shield.

The power seat can be adjusted in eight different ways using either of the power seat switches. The power seat can be adjusted up, down, forward, rearward, front up, front down, rear up and rear down, using either of the power seat switches.

The individual switches in the power seat switch module cannot be repaired. If one switch is damaged or faulty, the entire power seat switch module must be replaced. Refer to the owner's manual in the vehicle glove box for more information on the power seat switch functions and the seat adjusting procedures.