LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Locks >> DECKLID Release Switch >> Removal

DECKLID Release Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove left lower instrument panel cover.
  3. Disconnect the wire connector.
  4. Pinch four tabs around side of decklid release switch on the rear side of the left lower instrument panel trim and push switch through opening.
scientia non olet · About LEMON Manuals