LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electronic Control Modules (Service Information)) >> Sentry Key Remote Entry Module >> Installation

Sentry Key Remote Entry Module: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying SKREEM Harness Connectors
GC0033562Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the SKREEM module to the base plate.
  2. Connect the 18-pin harness connector and the 2-pin CAN BUS harness connector (1) to the SKREEM module.
  3. Connect the 2-pin harness connector for the sentry key antenna ring.
  4. Install the Instrument Cluster. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - INSTALLATION) .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals