LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electronic Control Modules (Service Information)) >> Powertrain Control Module >> Removal >> Removal - RHD

Removal - RHD

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Control Modules & Components
GC0034988Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Slide the clips forward to remove the plastic control module box cover (1).
  3. Holding the metal powertrain control module retaining clip back, pull the powertrain control module (2) up and out of the control module box (5).
  4. Disconnect the PCM harness electrical connector and remove the powertrain control module (2).
scientia non olet · About LEMON Manuals